Conqueror Upgrade Failure

Created by Guillaume Nadeau, Modified on Wed, 12 Jun, 2024 at 4:53 PM by Guillaume Nadeau

When updating Conqueror, if you get something similar to this, you might want to follow the steps below.

It shows that the Master Could Not Be Reached. That means the computer was not able to get the files to upgrade to the next versions.

1) Right-click the QAMF Red Triangle from the task bar and select STOP SERVER.

2) Windows asks for some credentials. Click MORE CHOICES at the bottom left, select ADMINISTRATION and enter this password as is: Conqueror. Then, click YES.

3) Wait about 10-15 seconds and the QAMF Red Triangle will turn grey.

4) Wait another 10-15 seconds.

5) Right-click the QAMF Grey Triangle from the task bar and select START SERVER.

6) Windows asks for some credentials. Click MORE CHOICES at the bottom left, select ADMINISTRATION and enter this password as is: Conqueror. Then, click YES. See image at Step 2.

7) When the QAMF Triangle goes red, double-click it to see if the upgrading process has started or not. In my case, it did.

8) Wait until you see this message. It tells you that the process of all done.

9) Open Conqueror. At the top left, you should see the number of the version you just upgraded to.

Hope it helps in the future. Have a fantastic day :-)

Was this article helpful?